Click on the image to check the artwork
By certification 
Twin headed milling machine
* Meticulous assembly practices
* High speed and efficiency
* Integrated automation
* Maximum accuracy
Machine Specifications,Model No.: TH520NC
CUTTING CAPACITY (W X L X H)
Max. 520 x 520 x 200 mm
Min. 60 x 60 x 60 mm
WORK LOAD CAPACITY 500 kg
DIMENSIONS (W X L X H) : 3100 x 3200 x 1800 mm
Whether you are performing standard plate milling or need special milling head technology,
the advantages offered by the GooDa TH and VM Series of milling machines deliver the
high angular accuracy, parallelism, and productivity you need to stay ahead in a rapidly
changing industry.
* Shorter handling times
* Lower error rates with automatic material width calibration
* Automatic indexing of the workpiece
* User-friendly operation
According to following standards:
* ISO 179/180
* ISO 527
* ISO 6259
* ISO 16770
* ASTM D 638
* ASTM D 1822
Milling all four sides of a plate is a simple process:
1. The workpiece is clamped by the Hydraulic Clamper System.
2. Two surfaces are milled with two cutters at one time automatically.
3. After milling two surfaces, the index table is automatically rotated 90 degrees.
4. The two remaining surfaces are milled Automatically
International sales& Service:Address: No.35, Xinfa South, Wusha, Changan Town, Dongguang city,GD,
ChinaTel: +86-18665189583
Fax: +86-769-81502791
Email: alex.ning@goodacnc.com
Skype: alexli659
* Meticulous assembly practices
* High speed and efficiency
* Integrated automation
* Maximum accuracy
Machine Specifications,Model No.: TH520NC
CUTTING CAPACITY (W X L X H)
Max. 520 x 520 x 200 mm
Min. 60 x 60 x 60 mm
WORK LOAD CAPACITY 500 kg
DIMENSIONS (W X L X H) : 3100 x 3200 x 1800 mm
Whether you are performing standard plate milling or need special milling head technology,
the advantages offered by the GooDa TH and VM Series of milling machines deliver the
high angular accuracy, parallelism, and productivity you need to stay ahead in a rapidly
changing industry.
* Shorter handling times
* Lower error rates with automatic material width calibration
* Automatic indexing of the workpiece
* User-friendly operation
According to following standards:
* ISO 179/180
* ISO 527
* ISO 6259
* ISO 16770
* ASTM D 638
* ASTM D 1822
Milling all four sides of a plate is a simple process:
1. The workpiece is clamped by the Hydraulic Clamper System.
2. Two surfaces are milled with two cutters at one time automatically.
3. After milling two surfaces, the index table is automatically rotated 90 degrees.
4. The two remaining surfaces are milled Automatically
International sales& Service:Address: No.35, Xinfa South, Wusha, Changan Town, Dongguang city,GD,
ChinaTel: +86-18665189583
Fax: +86-769-81502791
Email: alex.ning@goodacnc.com
Skype: alexli659
